Romford, Brentwood & East London
Toilets
Fitted, swapped, or the one that has been running quietly into the pan since the spring.
- Over 10 years in the trade, WRAS, G3 and heat pump qualified
- A price before anything starts
- Send a photo of the fault and we will know what to bring
What it is
Toilets in Brentwood and Romford
A toilet that runs is wasting more water than people expect and it is almost always the fill valve or the flush valve, both of which are small parts. It is worth fixing early because the constant trickle marks the pan.Replacing a toilet is rarely only the toilet. The pan connector is the part that usually explains a smell or a damp patch behind it, and on an older close-coupled suite the soil pipe position often decides what will physically fit.If it is a cloakroom or a downstairs loo, the waste run matters as much as the pan, and that is the thing to check before anything is ordered. Get a free quote
How we do it
- 1Tell us what it is doing
Running, leaking, not flushing, or being replaced. A photo of the cistern inside helps.
- 2We check the connector as well
Because that is what usually explains a smell or a damp patch.
- 3Price first
£150 an hour, minimum one hour, and we say if a part has to be ordered.
- 4Fitted and tested
Flushed, checked for movement, and left sealed.
Want a price for toilets?
Tell us what needs doing and we will tell you what it takes. No obligation, and nothing starts until you have agreed the price.
Past work
Real results
Our own photographs of our own jobs.
Send a photo and get an answer
Tell Anthony what you can see and he will tell you what it needs.
What our customers say
Anthony is amazing! We haven’t had heating in 4 and a half months and have had 3 previous engineers visit to try and fix it. Big thank you to Anthony for fixing it so quickly on his visit.
Anthony our engineer was amazing! Sorted out issue quickly and efficiently. Very polite and friendly!! Was a pleasure meeting you mate.
The plumber was really good. He fixed the HIU that was leaking. Now it doesn’t leak anymore, and everything works perfectly. He did a great job!
Other work we do
HIU servicing
A heat interface unit that is never looked at loses hot water performance slowly enough that nobody notices until it is bad.
Read moreHIU repair
No hot water, no heating, a leak under the unit, or a code on the display. Telling us what it is doing saves a visit.
Read moreHIU replacement
If you live in a flat on communal heating, the unit in your cupboard is a heat interface unit, and replacing one is a different job from anything in a house.
Read moreRadiators
A radiator added, moved, swapped for a towel rail, or balanced so the back bedroom finally warms up.
Read moreLeaks
A leak you can see, a stain on a ceiling you cannot explain, or a meter that keeps turning with everything off.
Read moreDrainage
A sink that drains slowly, a gully that backs up in heavy rain, or waste pipework that has never run properly.
Read moreSinks and taps
Taps that drip, taps that have seized, and basins and sinks swapped without wrecking the worktop.
Read moreCylinders
G3 unvented qualified. Cylinders installed and replaced, vented and unvented, and the small parts on them that fail quietly until there is no hot water.
Read moreHeating controls
Thermostats, programmers and smart heating, fitted and actually set up rather than left on the default.
Read moreFrequently asked questions
Questions about this work
How much is it?
£150 an hour with a one hour minimum. A fill valve or a flush valve is usually within it.
My toilet runs constantly.
Fill valve or flush valve nine times out of ten. Both are small parts and it is worth doing before it marks the pan.
There is a smell behind the toilet.
Usually the pan connector rather than the toilet. It is a short job and it is the first thing we check.
How do we get started?
Call 07444 756220 and speak to Anthony, or send a message on WhatsApp to the same number. You can also email monganplumbingandheating@yahoo.com. Include the property postcode and a short description of what needs attention.
What if the heating or hot water has stopped?
Tell us what has changed and any fault code on the display, and have a look at what the pressure gauge reads. If there is water coming out of the unit, turn the water off at the stopcock and ring us. A photo of the display saves a lot of guessing.
Call us for your instant no-obligation quote
Tell us what needs doing and we will tell you what it takes. No obligation, and nothing starts until you have agreed the price.
Get in touch
Tell us what is happening and where the property is. A photo of the unit, the fault code or the leak answers more than a paragraph does.
The plumber was really good. He fixed the HIU that was leaking. Now it doesn’t leak anymore, and everything works perfectly. He did a great job!
Good HIU service, knows his staff well and very quick and the gentleman even helped fixed error code on ambiente heating system, which was not part…