Romford, Brentwood & East London
Heating controls
Thermostats, programmers and smart heating, fitted and actually set up rather than left on the default.
- Over 10 years in the trade, WRAS, G3 and heat pump qualified
- A price before anything starts
- Send a photo of the fault and we will know what to bring
What it is
Heating controls in Brentwood and Romford
A lot of homes are running a good heating system on controls that were fitted with the system before last, which means the heating comes on at the wrong times and the thermostat is in the coldest room in the house.Where the thermostat is matters as much as what it is. A hallway thermostat next to a draughty front door will run the heating long after the rooms are warm, and no amount of smart scheduling fixes a sensor in the wrong place.Smart heating is included in what we fit. The part people find useful is not the app, it is the scheduling and the room-by-room control, and both need setting up properly on the day rather than left for you to work out. Get a free quoteHow we do it
- 1Tell us what you have
What is on the wall now and what you want it to do. A photo of the existing controls helps.
- 2We look at where it is as well as what it is
A thermostat in the wrong room is a problem no control will fix.
- 3Price first
£150 an hour, minimum one hour.
- 4Fitted, set up and shown to you
Scheduled, tested, and we go through it with you before we leave.
Want a price for heating controls?
Tell us what needs doing and we will tell you what it takes. No obligation, and nothing starts until you have agreed the price.
Past work
Real results
Our own photographs of our own jobs.
Send a photo and get an answer
Tell Anthony what you can see and he will tell you what it needs.
What our customers say
Anthony is amazing! We haven’t had heating in 4 and a half months and have had 3 previous engineers visit to try and fix it. Big thank you to Anthony for fixing it so quickly on his visit.
Anthony our engineer was amazing! Sorted out issue quickly and efficiently. Very polite and friendly!! Was a pleasure meeting you mate.
The plumber was really good. He fixed the HIU that was leaking. Now it doesn’t leak anymore, and everything works perfectly. He did a great job!
Other work we do
HIU servicing
A heat interface unit that is never looked at loses hot water performance slowly enough that nobody notices until it is bad.
Read moreHIU repair
No hot water, no heating, a leak under the unit, or a code on the display. Telling us what it is doing saves a visit.
Read moreHIU replacement
If you live in a flat on communal heating, the unit in your cupboard is a heat interface unit, and replacing one is a different job from anything in a house.
Read moreRadiators
A radiator added, moved, swapped for a towel rail, or balanced so the back bedroom finally warms up.
Read moreLeaks
A leak you can see, a stain on a ceiling you cannot explain, or a meter that keeps turning with everything off.
Read moreDrainage
A sink that drains slowly, a gully that backs up in heavy rain, or waste pipework that has never run properly.
Read moreToilets
Fitted, swapped, or the one that has been running quietly into the pan since the spring.
Read moreSinks and taps
Taps that drip, taps that have seized, and basins and sinks swapped without wrecking the worktop.
Read moreCylinders
G3 unvented qualified. Cylinders installed and replaced, vented and unvented, and the small parts on them that fail quietly until there is no hot water.
Read moreFrequently asked questions
Questions about this work
How much is it?
£150 an hour, minimum one hour. A thermostat swap is usually inside it; a smart system with several rooms takes longer.
Do you fit smart heating?
Yes, that is included. The useful part is the scheduling and the room control, and we set those up on the day rather than leaving them on the default.
My thermostat is in the hall and the house is always too hot.
That is a very common one. A hallway thermostat by a draughty door runs the heating long after the rooms are warm.
How do we get started?
Call 07444 756220 and speak to Anthony, or send a message on WhatsApp to the same number. You can also email monganplumbingandheating@yahoo.com. Include the property postcode and a short description of what needs attention.
What if the heating or hot water has stopped?
Tell us what has changed and any fault code on the display, and have a look at what the pressure gauge reads. If there is water coming out of the unit, turn the water off at the stopcock and ring us. A photo of the display saves a lot of guessing.
Call us for your instant no-obligation quote
Tell us what needs doing and we will tell you what it takes. No obligation, and nothing starts until you have agreed the price.
Get in touch
Tell us what is happening and where the property is. A photo of the unit, the fault code or the leak answers more than a paragraph does.
The plumber was really good. He fixed the HIU that was leaking. Now it doesn’t leak anymore, and everything works perfectly. He did a great job!
Good HIU service, knows his staff well and very quick and the gentleman even helped fixed error code on ambiente heating system, which was not part…