Romford, Brentwood & East London
Leaks
A leak you can see, a stain on a ceiling you cannot explain, or a meter that keeps turning with everything off.
- Over 10 years in the trade, WRAS, G3 and heat pump qualified
- A price before anything starts
- Send a photo of the fault and we will know what to bring
What it is
Leaks in Brentwood and Romford
The useful distinction is whether you can see where it is coming from. A dripping joint under a sink is a short job. A damp patch on a ceiling is not, because water runs along a joist and comes through somewhere that is nowhere near the leak.If your water meter is moving with every tap off and nothing running, you have a leak somewhere on the supply, and that is worth saying on the phone because it changes what we bring.Turn the water off at the stopcock if it is running and you cannot stop it. Then ring. That part matters more than anything we could write here. Get a free quote
How we do it
- 1Stop it if you can
Stopcock off. If you do not know where yours is, we will ask and talk you through finding it.
- 2Tell us what you can see
Where the water is, when it started, and whether the meter moves with everything off.
- 3We find it properly
Including the parts you cannot see. Water travels, so the stain is rarely above the leak.
- 4Fixed and tested
Repaired, run up and checked, and we tell you what caused it.
Want a price for leaks?
Tell us what needs doing and we will tell you what it takes. No obligation, and nothing starts until you have agreed the price.
Past work
Real results
Our own photographs of our own jobs.
Send a photo and get an answer
Tell Anthony what you can see and he will tell you what it needs.
What our customers say
Anthony is amazing! We haven’t had heating in 4 and a half months and have had 3 previous engineers visit to try and fix it. Big thank you to Anthony for fixing it so quickly on his visit.
Anthony our engineer was amazing! Sorted out issue quickly and efficiently. Very polite and friendly!! Was a pleasure meeting you mate.
The plumber was really good. He fixed the HIU that was leaking. Now it doesn’t leak anymore, and everything works perfectly. He did a great job!
Other work we do
HIU servicing
A heat interface unit that is never looked at loses hot water performance slowly enough that nobody notices until it is bad.
Read moreHIU repair
No hot water, no heating, a leak under the unit, or a code on the display. Telling us what it is doing saves a visit.
Read moreHIU replacement
If you live in a flat on communal heating, the unit in your cupboard is a heat interface unit, and replacing one is a different job from anything in a house.
Read moreRadiators
A radiator added, moved, swapped for a towel rail, or balanced so the back bedroom finally warms up.
Read moreDrainage
A sink that drains slowly, a gully that backs up in heavy rain, or waste pipework that has never run properly.
Read moreToilets
Fitted, swapped, or the one that has been running quietly into the pan since the spring.
Read moreSinks and taps
Taps that drip, taps that have seized, and basins and sinks swapped without wrecking the worktop.
Read moreCylinders
G3 unvented qualified. Cylinders installed and replaced, vented and unvented, and the small parts on them that fail quietly until there is no hot water.
Read moreHeating controls
Thermostats, programmers and smart heating, fitted and actually set up rather than left on the default.
Read moreFrequently asked questions
Questions about this work
How much is it?
£150 an hour, minimum one hour. Most visible leaks are inside the hour; a hidden one takes longer to find than to fix and we say so.
There is a damp patch on my ceiling.
Do not assume the leak is directly above it. Water runs along joists. That is exactly the sort we come out to find rather than guess at.
My meter is moving and nothing is on.
Then there is a leak on the supply. Say that when you ring, because it changes what we bring with us.
How do we get started?
Call 07444 756220 and speak to Anthony, or send a message on WhatsApp to the same number. You can also email monganplumbingandheating@yahoo.com. Include the property postcode and a short description of what needs attention.
What if the heating or hot water has stopped?
Tell us what has changed and any fault code on the display, and have a look at what the pressure gauge reads. If there is water coming out of the unit, turn the water off at the stopcock and ring us. A photo of the display saves a lot of guessing.
Call us for your instant no-obligation quote
Tell us what needs doing and we will tell you what it takes. No obligation, and nothing starts until you have agreed the price.
Get in touch
Tell us what is happening and where the property is. A photo of the unit, the fault code or the leak answers more than a paragraph does.
The plumber was really good. He fixed the HIU that was leaking. Now it doesn’t leak anymore, and everything works perfectly. He did a great job!
Good HIU service, knows his staff well and very quick and the gentleman even helped fixed error code on ambiente heating system, which was not part…